![]() ![]() Server must be in the same subnetwork if you do not have a router to route That the device has a route to the remote server. The IPv4 address or IPv6 address for the 10/100/1000 BASE-T Ethernet port Interruption during any install procedure, which can corrupt the software Internal bootflash: has approximately 250 MB of free This location includes the active and standby supervisor module bootflash: Sufficient space is available in the location where you are copying the images. You cannot configure a device during an upgrade. Ensure that everyone who hasĪccess to the device or the network is not configuring the device or the Upgrade when your network is stable and steady. To use ISSU to upgrade to any software image version, follow these guidelines: See the Release Notes document for the target upgrade release before Series NX-OS Release Notes contain specific upgrade guidelines for each Communications, Services, and Additional InformationĬisco Nexus 7000 Series NX-OS Software Upgrade and Downgrade Guide.Upgrade of a Device with a Single Supervisor Upgrade of a Device with Dual Supervisors Nondisruptive Upgrade of a Device with Dual Supervisors Example Outputs from Cisco NX-OS Software Upgrades.Traditional Upgrade or Downgrade (Chassis Reload) Upgrading a Device with a Single Supervisor Module.Upgrading a Device with Dual Supervisor Modules. ![]() Prerequisites for Upgrading the Cisco NX-OS Software. ![]() Software Upgrades on Devices with Dual Supervisor Modules
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |